Brocade Fabric OS Command Reference Manual - Supporting Fabric OS v5.3.0 (53-1000436-01, June 2007)

68 Fabric OS Command Reference Manual

53-1000436-01

cfgDisable

Disables a zone configuration.

Synopsis cfgdisable

Description Use this command to disable the current zone configuration. The fabric returns to nonzoning mode,

in which all devices see each other.

This command ends and commits the current zoning transaction buffer to both volatile and

nonvolatile memory. If a transaction is open on a different switch in the fabric when this command

is run, the transaction on the other switch is automatically aborted. A message is displayed on the

other switches to indicate the aborting of the transaction.

If the default zone access mode is “No Access”, then this command becomes cfgEnable

“d_efault_Cfg”. See defZone.

This command requires a Brocade Advanced Zoning license.

When security is enabled, this command can be issued only from the primary FCS switch.

Operands none

Examples To disable the current zone configuration:

switch:admin> cfgdisable

You are about to disable zoning configuration. This

action will disable any previous zoning configuration enabled.

Do you want to disable zoning configuration? (yes, y, no, n): [no] y