Brocade Fabric OS Command Reference Manual - Supporting Fabric OS v5.3.0 (53-1000436-01, June 2007)

94 Fabric OS Command Reference Manual
53-1000436-01
configShow
2
configShow
Displays system configuration settings.
Synopsis configshow ["pattern"]
Description Use this command to display some system configuration settings in addition to those items set by
the configure command.
Not all values displayed are applicable to all system models and configurations.
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands This command has the following operand:
"pattern" Specify a text string, in quotation marks, that limits the output of the
command to only those entries that contain pattern. Use of wildcards and
other common regular expression operators is not supported. Some
configuration settings will not display selectively in this manner. This operand
is optional. If omitted, all system configuration settings are displayed.
Examples To display configuration settings for “passwdcfg”:
switch:admin> configshow “passwdcfg”
passwdcfg.digits:0
passwdcfg.history:1
passwdcfg.lockoutduration:30
passwdcfg.lockoutthreshold:0
passwdcfg.lowercase:0
passwdcfg.maxpasswordage:0
passwdcfg.minlength:8
passwdcfg.minpasswordage:0
passwdcfg.punctuation:0
passwdcfg.status:0
passwdcfg.uppercase:0
passwdcfg.warning:0
To display system configuration settings:
switch:admin> configshow
RSCN.end-device.TransmissionMode:0
alpaList:1
cer.internal_port_code:1
cfgload.secure:0
diag.loopID:125
diag.mode.burnin:0
diag.mode.esd:0
diag.mode.lab:0
diag.mode.mfg:0
diag.postDisable:1
diag.retryDisable:0
diag.script.BURNIN:doburnin
diag.script.CP128.HOLDOFF:diagholdoff.sh
diag.script.CP128.POST1:cp128post1.sh
diag.script.CP128.POST2:cp128post2.sh
diag.script.PORT.HOLDOFF:diagholdoff.sh
diag.script.PORT.POST1:portpost1.sh
(continued on next page)