Brocade Fabric OS Command Reference Manual - Supporting Fabric OS v5.3.0 (53-1000436-01, June 2007)

Fabric OS Command Reference Manual 115
53-1000436-01
defZone
2
A cfgSave, cfgEnable, or cfgDisable command must be performed
subsequent to the use of this command to commit the changes and
distribute them to the fabric. If a cfgSave is performed and the fabric is
already in the No Access default zone state, a cfgDisable is sent to the fabric.
For example
:
switch:admin> defzone --allaccess
switch:admin> cfgsave
An audit log record is generated for each use of this command option.
--show Displays the current state of the default zone access mode
.
Examples To create a default zone configuration:
switch:admin> cfgactvshow
Effective configuration:
no configuration in effect
switch:admin> defzone --noaccess
switch:admin> cfgsave
switch:admin> defzone --show
Default Zone Access Mode
committed - No Access
transaction - No Transaction
See Also none