Brocade Fabric OS Command Reference Manual - Supporting Fabric OS v5.3.0 (53-1000436-01, June 2007)

Fabric OS Command Reference Manual 117
53-1000436-01
defZoneDelete
2
defZoneDelete
Deletes the default zone configuration.
Synopsis defzonedelete
Description Use this command to delete the default zone configuration.
This command changes the defined configuration. This command deletes the cfg "d_efault_Cfg"
that contains the zone "d_efault_Zone" that in turn contains the zone member
"00:00:00:00:00:00:00:00".
If "d_efault_Cfg" is the effective zone configuration, this command executes cfgDisable; otherwise,
it executes cfgSave.
Also, this command deletes the alias "d_efault_Zone_Alias" that has the member "1,0".
This command requires a Brocade Advanced Zoning license.
When security is enabled, this command can be issued only from the primary FCS switch.
Names with the “d_efault” prefix are reserved for default zoning use.
If “d_efault_Cfg” is the effective zone configuration, then both cfgShow and cfgActvShow will
display “DefaultZone” as the effective zone configuration.
Operands None
Examples To delete a default zone configuration:
switch:admin> cfgactvshow
Effective configuration:
no configuration in effect
switch:admin> defzonedelete
switch:admin> cfgactvshow
See Also defZoneCreate