Brocade Fabric OS Command Reference Manual - Supporting Fabric OS v5.3.0 (53-1000436-01, June 2007)

Fabric OS Command Reference Manual 119

53-1000436-01

diagCommandShow

Displays diagnostic command descriptions.

Synopsis diagcommandshow [command]

Description Use this command to display a short description of a diagnostic command.

Use diagHelp to look up diagnostic command help pages.

You can issue this command on the FR4-18i blade in a Brocade chassis; however, the command is

not supported by the Brocade platform and does not effect any other feature operations. This

availability is offered to maintain consistency across a mixed-blade environment.

Operands This command has the following operands:

command Specify a command name to display more detailed information

Examples To display a list of diagnostic commands, with descriptions:

switch:admin> diagcommandshow

bladepropshow display blade properties

chippropshow display chip properties

chipregshow display contents of port registers

datatypeshow display available diagnostic data types

diagcommandshow display diagnostic command descriptions

diaghelp display diagnostic command descriptions

diagmodeshow display diagnostic mode configuration

diagoktorun check to see if it is ok to run a diagnostic test

diagshow display diagnostics status

diagstatus display currently running diagnostic tests

itemlist diagnostic list parameter syntax and grammar

information

minispropshow display mini-switch ASIC property

minisregshow display contents of mini-switch registers.

ptbufshow dump port buffer contents

(output truncated)