Brocade Fabric OS Command Reference Manual - Supporting Fabric OS v5.3.0 (53-1000436-01, June 2007)

Fabric OS Command Reference Manual 125

53-1000436-01

diagHelp

Displays diagnostic command information.

Synopsis diaghelp [command]

Description Use this command to display a short description of diagnostic commands that are available to the

user if command is not specified. The command builds a database of command information during

the first execution. This process takes a few seconds to complete.

Use default operands when running diagnostics commands. Nondefault settings require detailed

knowledge of the underlying hardware and are intended for support personnel only. Contact

support if you want to use these operands.

The execution of this command is subject to Admin Domain restrictions that may be in place.

Operands This command has the following operand:

command Specify a command name to display more detailed information.

Examples To display diagnostic command information:

switch:admin> diaghelp

bladepropshow display blade properties

chippropshow display chip properties

chipregshow display contents of port registers

datatypeshow display available diagnostic data types

diagcommandshow display diagnostic command descriptions

diaghelp display diagnostic command descriptions

diagmodeshow display diagnostic mode configuration

diagoktorun check to see if it is ok to run a diagnostic test

diagshow display diagnostics status

diagstatus display currently running diagnostic tests

itemlist diagnostic list parameter syntax and grammar

information

minispropshow display ASIC pair property

minisregshow display contents of ASIC pair registers.

ptbufshow dump port buffer contents

(output truncated)