Brocade Fabric OS Command Reference Manual - Supporting Fabric OS v5.3.0 (53-1000436-01, June 2007)

132 Fabric OS Command Reference Manual
53-1000436-01
diagShow
2
diagShow
Displays diagnostics status.
Synopsis diagshow [--slot number][-uports itemlist][-bports itemlist][-use_bports value]
Description Use this command to display the diagnostics status for the specified list of blade or user ports.
Operands This command has the following optional operands:
-slot number Specify which slot to operate on. If this option is not specified, the default slot
0 is used. The default slot is designed to operate on fixed-port-count
products. By default, this command displays all user ports in the system.
-uports itemlist Specify a list of user ports to display.
-bports itemlist Specify a list of blade ports to display.
-use_bports value If this value is not 0 the diagnostics status for the blade ports specified in
-use_bports displays; otherwise, the user ports specified in -uports displays.
The default value is 0.
Examples To display diagnostic status on a switch blade:
switch:admin> diagshow
Diagnostics Status: Fri Feb 08 15:25:24 2002
Slot: 1 UPORTS
Port BPort Diag Active Speed ......
0 15 OK UP 2G Auto ......
1 14 OK UP 2G Auto ......
2 13 OK UP 2G Auto ......
3 12 OK UP 2G Auto ......
4 31 OK UP 2G Auto ......
5 30 OK UP 2G Auto ......
6 29 OK UP 2G Auto ......
7 28 OK UP 2G Auto ......
8 47 OK UP 2G Auto ......
(output truncated)
See Also itemList