Brocade Fabric OS Command Reference Manual - Supporting Fabric OS v5.3.0 (53-1000436-01, June 2007)

Fabric OS Command Reference Manual 143

53-1000436-01

enclosureShow

Displays attributes of the switch enclosure.

Synopsis enclosureshow attribute

Description Use this command to display attributes of the switch enclosure. Currently, supported attributes are

the vendor-specific enclosure identifier and the identifier of the enclosure interface to which the

switch is attached.

This command is only meaningful for the products that are embedded in a blade server or storage

chassis. Most of the options are applicable to a specific platform. Options that do not apply to a

platform are identified with a “Not supported on this platform” message.

The execution of this command is subject to Admin Domain restrictions that may be in place.

Operands This command has the following operand:

attribute Attribute of the enclosure to display:

id Displays the vendor-specific enclosure identifier.

modelname Displays the vendor-specific enclosure model name.

slotid Displays the identifier of the enclosure interface to which the switch is

attached.

rackname Displays the name assigned by the enclosure manager to this rack.

rackid Displays the serial number assigned by the enclosure manager to this rack.

enclosurename Displays the name assigned by the enclosure manager to this enclosure.

enclosureid Displays the serial number assigned by the enclosure manager to this

enclosure.

connname Displays the product name used by the enclosure manager for this switch

model.

connaddr Displays the connector address used by the enclosure manager for this

switch (indicates the physical position of the switch in the enclosure).

connid Displays the serial number of the switch used by the enclosure manager (not

to be confused with the Factory Serial Number).

conntype Displays the connector type used by the enclosure manager for this model of

switch.

connloc Displays the switch location within the enclosure.