Brocade Fabric OS Command Reference Manual - Supporting Fabric OS v5.3.0 (53-1000436-01, June 2007)

148 Fabric OS Command Reference Manual

53-1000436-01

errFilterSet

Sets a filter for an error log destination.

Synopsis errfilterset [-d "destination"][-v "severity"]

Description Use this command to set a filter for an error log destination. A filter is set based on the severity level

of the messages.

If no parameters are specified, this command displays the filters that are currently in use.

The execution of this command is subject to Admin Domain restrictions that may be in place.

Operands This command has the following operands:

-d "destination" Specify the destination to set the filter . "console" is the only valid value at this

time.

-v "severity" Specify the minimum severity level of the message to pass through the filter.

Valid values are "INFO", "WARNING", "ERROR", or "CRITICAL".

Examples To display the current filter settings:

switch:admin> errfilterset

console: filter severity = WARNING

To set the filter severity level for the console:

switch:admin> errfilterset -d "console" -v "WARNING"