Manualshelf

Brocade Fabric OS Command Reference Manual - Supporting Fabric OS v5.3.0 (53-1000436-01, June 2007)

ManualsBrandsHP ManualsStorageHP StorageWorks 4/32B SAN Switch Power Pack
191192193194195196197198199200
168 Fabric OS Command Reference Manual
53-1000436-01
fanDisable
2
fanDisable
Disables a fan unit.
Synopsis fandisable unit
Description Use this command to disable a nonfaulty fan unit by setting the RPM speed to 0.
This command is not available on nonbladed systems except for the Brocade 4100 and 4900.
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands This command has the following operand:
unit Specifies the fan unit number to disable.
Examples To disable a fan unit:
switch:admin> fandisable 1
Fan unit 1 has been disabled
See Also fanEnable, fanShow