Brocade Fabric OS Command Reference Manual - Supporting Fabric OS v5.3.0 (53-1000436-01, June 2007)

Fabric OS Command Reference Manual 193

53-1000436-01

fcrbcastconfig

Display or set the broadcast frame forwarding option.

Synopsis frcbcastconfig --show ,--enable <-f> <fabric id>, -disable <-f> <fabric id> --help

Description

Use this command to set the broadcast frame option to ON or OFF or to displaythe current

configuration. If no operands are specified, this command displays the current settings on the

switch.

Operands

This command takes the following operands:

-show Shows the current configuration on the switch.

-enable -f fabric id

Enables the frame forwarding option for the specified fabric ID.

-disable -f fabric id Disables the frame forwarding option for the specified fabric ID

-f fabric id Specifies the fabric ID. Valid values are 1-128.

--help Displays the list of actions possible.

EXAMPLES To display the current configuration of the switch.

switch:admin> frcbcastconfig --show

Broadcast configuration is disabled for:

fid 2

fid 128

fid 33