Brocade Fabric OS Command Reference Manual - Supporting Fabric OS v5.3.0 (53-1000436-01, June 2007)

200 Fabric OS Command Reference Manual

53-1000436-01

fcrLsanCount

Displays or sets the maximum LSAN count.

Synopsis fcrlsancount [max-lsan-count]

Description Use this command to set or display the maximum number of LSAN zones that can be configured on

the router. By default, this limit is set to 3000, which is also the minimum. This parameter can have

the maximum value set to 5000. The maximum LSAN count limit is also displayed with command

fcrresourceshow. Only 3000 or 5000 are supported as valid count.

Operands If no operands are specified, this command displays the current LSAN zone limit.

This command has the following operands:

max-lsan-count Specifies the new LSAN count.

Examples To display the current LSAN limit:

switch:admin> fcrlsancount

LSAN Zone Limit: 3000

To set the new LSAN zone limit:

switch:admin> fcrlsancount 5000

LSAN Zone Limit: 5000