Brocade Fabric OS Command Reference Manual - Supporting Fabric OS v5.3.0 (53-1000436-01, June 2007)

202 Fabric OS Command Reference Manual
53-1000436-01
fcrLsanMatrix
2
--apply Applies the information from the cache to the persistent memory only if there
is no affect to the existing import/export devices. Otherwise, an error
message is displayed.
--cancel Cancels the data that was not applied; revert to the persistent information.
--fabricview Views all the static and default/dynamic fabric binding in the backbone.
--verify Verifies if the LSAN Zone information in the cache, which is entered by the
user, will succeed when the user applies the data. The data is okay if the
apply operation does not cause disruption to the traffic.
--quickmode Derives the LSAN Zone matrix from the import/export setup.
Examples The backbone has the following online edge fabrics (FIDs):
1, 2, 4, 5, 7, 8, 10 (currently, 14, 19 are not available).
To add the LSAN Zone Matrix data:
switch:admin > fcrlsanmatrix --add 4 5
switch:admin >fcrlsanmatrix --add 4 7
switch:admin > fcrlsanmatrix --add 10 14
switch:admin > fcrlsanmatrix --add 10 19
To remove an entry:
switch:admin > fcrlsanmatrix --remove 10 14
To display the information from the cache:
switch:admin > fcrlsanmatrix --display
Fabric ID 1 Fabric ID 2
------------------------------------
4 5
4 7
10 19
To apply the changes persistently:
switch:admin > fcrlsanmatrix --apply
To view the persistent changes:
switch:admin > fcrlsanmatrix
LSAN MATRIX is activated
Fabric ID 1 Fabric ID 2
--------------------------------------
4 5
4 7
10 19
To view the LSAN Zone static and default/dynamic binding in the backbone:
For example, in the backbone where online fabrics are:
1, 2, 4, 5, 7, 8, 10
switch:admin > fcrlsanmatrix --fabricview
LSAN MATRIX is activated