Brocade Fabric OS Command Reference Manual - Supporting Fabric OS v5.3.0 (53-1000436-01, June 2007)

Fabric OS Command Reference Manual 253

53-1000436-01

fwAlarmsFilterSet

Enables or disables alarms for Fabric Watch.

Synopsis fwalarmsfilterset [mode]

Description Use this command to configure alarm filtering for Fabric Watch. By turning off the alarms, all

non-environment class alarms are suppressed. By turning on the alarms, all class alarms are

generated.

This command requires a Fabric Watch license.

The execution of this command is subject to Admin Domain restrictions that may be in place.

Operands This command has the following operand:

mode Specify 1 to enable the alarms, 0 to disable the alarms. If no operand is

specified, the default value is 0 (alarms deactivated). This operand is

optional.

Examples To enable alarms in Fabric Watch:

switch:admin> fwalarmsfilterset

FW: Alarms are already disabled

switch:admin> fwalarmsfilterset 1

FW: Alarms are aleady enabled