Brocade Fabric OS Command Reference Manual - Supporting Fabric OS v5.3.0 (53-1000436-01, June 2007)

272 Fabric OS Command Reference Manual
53-1000436-01
fwShow
2
fwShow
Displays the thresholds monitored by Fabric Watch.
Synopsis fwshow [--port --persistence] | [--disable --port]
Description Use this command to display the thresholds monitored by Fabric Watch. This command also
displays the port persistence time and ports with all thresholds disabled.
In Access Gateway mode, only the following class thresholds are supported. F/FL Port (Copper)
class threshold is supported only on Embedded platforms.
This command requires a Fabric Watch license.
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands The operands are as follows:
--port --persistence
Displays the time that a port must be persistently in a state before being
marked as such.
--disable --port Displays the ports that have all associated thresholds disabled.
Examples To display thresholds and port persistence time:
switch:user> fwshow
1 : Show class thresholds
2 : Detail threshold information
3 : Show console message level
4 : Show port persistence time
5 : Quit
Select an item => : (1..3) [3] 1
1 : Environment class
2 : SFP class
3 : Port class
4 : Fabric class
5 : E-Port class
6 : F/FL Port (Optical) class
7 : Alpa Performance Monitor class
(continued on next page)
TABLE 13 Access Gateway mode classes
Class
Environmental
SFP
Port
Fabric
F/FL_Port (Optical)
F/FL_Port (Copper)
Resource