Brocade Fabric OS Command Reference Manual - Supporting Fabric OS v5.3.0 (53-1000436-01, June 2007)

296 Fabric OS Command Reference Manual
53-1000436-01
interfaceShow
2
nflags Internal FSPF flags.
initCount Number of times this neighbor was initialized without the interface going
down.
lastInit Time the last initializing state, NB_ST_INIT, on this interface.
firstHlo Time the first hello sent on this interface.
nbstFull Time the last finishing state, NB_ST_FULL, on this interface.
&dbRetransList Pointer to the database retransmission list.
&lsrRetransList Pointer to the Link State Records (LSR) retransmission list.
&lsrAckList Pointer to the Link State Acknowledgements (LSA) retransmission list.
inactTID Inactivity timer ID.
helloTID Hello timer ID.
dbRtxTID Database retransmission timer ID.
lsrRtxTID LSR retransmission timer ID.
inactTo Inactivity timeout value, in milliseconds. When this timeout expires, the
adjacency with the neighbor switch is broken and new paths are computed to
all possible destination switches in the fabric.
helloTo Hello timeout value, in milliseconds. When this timeout expires, a Hello frame
is sent to the neighbor switch through this port.
rXmitTo Retransmission timeout value, in milliseconds. It is used to transmit topology
information to the neighbor switch. If no acknowledgement is received within
this value, the frame is retransmitted.
nCmdAcc Total number of commands accepted from the neighbor switch. Number
includes Hellos, Link State Updates (LSU), and LSAs.
nInvCmd Number of invalid commands received from the neighbor switch. Usually
commands with an FSPF version number higher than the one running on the
local switch.
nHloIn Number of Hello frames received from the neighbor switch.
nInvHlo Number of invalid Hello frames (Hello frames with invalid parameters)
received from the neighbor switch.
nLsuIn Number of LSUs received from the neighbor switch.
nLsaIn Number of LSAs received from the neighbor switch.
attHloOut Number of attempted transmissions of Hello frames to the neighbor switch.
nHloOut Number of Hello frames transmitted to the neighbor switch.
attLsuOut Number of attempted transmissions of LSUs to the neighbor switch.
nLsuOut Number of LSUs transmitted to the neighbor switch.
attLsaOut Number of attempted transmissions of LSAs to the neighbor switch.
nLsaOut Number of LSAs transmitted to the neighbor switch.
The execution of this command is subject to Admin Domain restrictions that may be in place.