Brocade Fabric OS Command Reference Manual - Supporting Fabric OS v5.3.0 (53-1000436-01, June 2007)

300 Fabric OS Command Reference Manual
53-1000436-01
interopMode
2
Please run "msPlMgmtDeactivate" command to disable the Platform service.
The switch effective configuration will be lost when the operating mode is
changed; do you want to continue? (yes, y, no, n): [no] y
Interopmode is enabled
Note: It is recommended that you reboot this switch for the new change to take
effect.
switch:admin> reboot
NOTE
You MUST reboot this switch for the new change to take effect.
To disable interoperability mode:
switch:admin> interopmode 0
The switch effective configuration will be lost when the operating mode is
changed; do you want to continue? (yes, y, no, n): [no]
Note: It is recommended that you reboot this switch for the new change to take
effect.
switch:admin> reboot
To see connections on a switch that is operating in interop mode (ports 8/0, 8/1 show the
connections to the Brocade fabric; ports 8/2, 8/3 show the connections to a legacy McDATA fabric):
switch:admin> switchshow
switchName:b48000_194
switchType:42.2
switchState:Online
switchMode:Native
switchRole:Principal
switchDomain:4
switchId:fffc04
switchWwn:10:00:00:60:69:e4:00:88
zoning:ON (cfg80)
switchBeacon:OFF
blade1 Beacon: OFF
blade2 Beacon: OFF
blade4 Beacon: OFF
blade8 Beacon: OFF
FC Router:ON
FC Router BB Fabric ID:110
Index Slot Port Address Media Speed State Proto
===================================================
[output truncated]
191 4 31 04bf00 -- N4 No_Module
80 8 0 045000 id N4 Online EX-Port
10:00:00:05:1e:35:a4:53 "b4100_7x_2" (fabric id = 28 )
81 8 1 045100 id N4 Online EX-Port
10:00:00:05:1e:35:a4:53 "b4100_7x_2" (fabric id = 28 )
82 8 2 045200 id N2 Online EX-Port
10:00:08:00:88:03:74:8a "m4500_7x_206" (fabric id = 6 )
83 8 3 045300 id N2 Online EX-Port
10:00:08:00:88:03:74:8a "m4500_7x_206" (fabric id = 6 )
84 8 4 045400 id N4 No_Light
85 8 5 045500 id N4 No_Light