Brocade Fabric OS Command Reference Manual - Supporting Fabric OS v5.3.0 (53-1000436-01, June 2007)

302 Fabric OS Command Reference Manual

53-1000436-01

iodReset

Turns off the in-order delivery (IOD) option.

Synopsis iodreset

Description Use this command to turn off the IOD option. The IOD option is turned off by default; however, if the

IOD option was turned on using iodSet, this command can be used to turn it off again. Disabling

IOD allows fast re-routing after a fabric topology change.

This command might cause out-of-order delivery of frames during fabric topology changes.

The execution of this command is subject to Admin Domain restrictions that may be in place.

Operands none

Examples To turn off the IOD option:

switch:admin> iodreset

switch:admin> iodshow

IOD is not set