Brocade Fabric OS Command Reference Manual - Supporting Fabric OS v5.3.0 (53-1000436-01, June 2007)

Fabric OS Command Reference Manual 323
53-1000436-01
iscsiPortCfg
2
iscsiPortCfg
Displays or modifies iSCSI port parameters.
Synopsis iscsiportcfg --clearstats slot/geport
iscsiportcfg --default slot/geport
iscsiportcfg --show slot/geport [-v]
iscsiportcfg --modify slot/geport options
Description Use this command to display or modify the iSCSI port parameters.
The following table lists the default iSCSI port settings.
Setting Default
Error recovery level 0
Connections per session 1
Data digest support Disabled
Header digest suppor Disabled
Immediate data support No
First burst length value 512
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands This command has the following operands:
--modify Modifies the port parameters on the specified port. Valid options are:
-e value Specifies the error recovery level; values are 0, 1, or 2.
-c value Specifies the TCP of connections; values are 1 or 2.
-d value Enables or disables data digest support; specify 0 to disable or 1
to enable.
-a value Enables or disables header digest support; specify 0 to disable
or 1 to enable.
-i value Enables or disables immediate data support; specify 0 to
disable or 1 to enable.
-f value Specifies the first burst length value; values include 512, 1024,
2048, 4096, 8192, 16384, and 32768.
--clearstats Clears port-level iSCSI statistics on the specified port.
--default Resets the port to the default values. See the "Description" section for the list
of default values.
--show Displays port-level protocol parameters, statistics, and session information
on the specified port. Options include:
-v Specifies verbose mode, which displays the initiator IP, TSID, and the
number of connections in addition to the other port-level information.
slot Specifies the slot number.