Brocade Fabric OS Command Reference Manual - Supporting Fabric OS v5.3.0 (53-1000436-01, June 2007)

342 Fabric OS Command Reference Manual
53-1000436-01
licenseRemove
2
licenseRemove
Removes the license key from the system.
Synopsis licenseremove "license"
Description Use this command to remove an existing license key from a switch. The existing license key must
be entered exactly as shown by licenseShow, including case.
When the key has been entered, use the licenseShow command to verify that the key has been
removed and the licensed product uninstalled.
After removing a license key, the switch must be rebooted. With no license key, licenseShow
displays “No licenses.”
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands The following operand is required:
"license" Specify the license key, in quotation marks. This operand is required
.
Examples To remove a license key from the switch:
switch:admin> licenseremove "bQebzbRdScRfc0iK"
removing license key "bQebzbRdScRfc0iK"
See Also licenseAdd, licenseHelp, licenseIdShow, licenseShow