Brocade Fabric OS Command Reference Manual - Supporting Fabric OS v5.3.0 (53-1000436-01, June 2007)

Fabric OS Command Reference Manual 373

53-1000436-01

myId

Displays the current login session details.

Synopsis myid

Description Use this command to display all local IPv4 or IPv6 addresses associated with the status of the

system and the login session details.

The login session gives details of the following:

CP/switch (or console/serial port) used to log in

The IP address of the current login session for telnet or the name of the current console port or the

serial port (if modem login used)

The current CP's mode (Active, Standby, or Unknown)

The current system status (Redundant, Non-Redundant, or Unknown)

The execution of this command is subject to Admin Domain restrictions that may be in place.

Operands none

Examples To display current login information:

switch:admin> myid

Current Switch: switch

Session Detail: switch (123.123.123.123) Active Redundant