Brocade Fabric OS Command Reference Manual - Supporting Fabric OS v5.3.0 (53-1000436-01, June 2007)

Fabric OS Command Reference Manual 375
53-1000436-01
nbrStatsClear
2
nbrStatsClear
Resets FSPF interface counters.
Synopsis nbrstatsclear [slotnumber/][portnumber]
Description Use this command to reset the counters of FSPF frames transmitted and received on each
interswitch link (ISL) or a specific ISL. These counters display using the using the interfaceShow
command.
Use this command without operands to reset counters on all interfaces.
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands This command has the following operands:
slotnumber For bladed systems only, specify the slot number of the port to display,
followed by a slash (/).
portnumber Specify the port number to display, relative to its slot for bladed systems. Use
switchShow to list valid ports. This operand is optional; if omitted, FSPF
statistics are reset.
When this command is specified with no operand, the statistics are cleared for all interfaces.
Examples To reset the counters on a port:
switch:admin> interfaceshow 1/0
idbP = 0x10050a38
Interface 0 data structure:
nghbP = 0x1004ce68
ifNo = 0
masterPort = 0 (self)
defaultCost = 500
cost = 500
delay = 1
(output truncated)
nCmdAcc = 37
nInvCmd = 0
nHloIn = 10
nInvHlo = 0
nLsuIn = 17
nLsaIn = 10
attHloOut = 11
nHloOut = 11
attLsuOut = 12
nLsuOut = 12
attLsaOut = 17
nLsaOut = 17
switch:admin> nbrstatsclear 1/0
switch:admin> interfaceshow 1/0
idbP = 0x10050a38