Brocade Fabric OS Command Reference Manual - Supporting Fabric OS v5.3.0 (53-1000436-01, June 2007)

444 Fabric OS Command Reference Manual

53-1000436-01

portAlpaShow

Displays the Arbitrated Loop Phyiscal Addresses (AL_PAs) of devices attached to a port.

Synopsis portalpashow [slotnumber/]portnumber

Description Use this command to display the AL_PAs of devices connected to a port, and whether these devices

are public or private. If the specified port is not an active FL_Port or if no AL_PAs are present, this

command prints an error.

The execution of this command is subject to Admin Domain restrictions that may be in place.

Operands This command has the following operands:

slotnumber For bladed systems only, specify the slot number of the port to display,

followed by a slash (/).

portnumber Specify the port number to display, relative to its slot for bladed systems. Use

switchShow to list valid ports.

Examples To display the AL_PAs of a port:

switch:user> portalpashow 4/14

AL_PA type AL_PA type AL_PA type

0xe2 public 0xe4 public