Brocade Fabric OS Command Reference Manual - Supporting Fabric OS v5.3.0 (53-1000436-01, June 2007)

18 Fabric OS Command Reference Manual
53-1000436-01
ag
2
--failbackdisable <N_Port>
Disables the failback policy for an N_Port
Examples To show the options for ag:
switch:admin> ag --help
Usage: ag <action> [<arguments>]
--show Displays the AG's configuration and state
--modeshow Displays agmode setting for the switch
--modeenable Enables AG mode on the switch
--modedisable Disables AG mode on the switch
--mapshow [N_Port] Shows N-port Mapping
--mapset <N_Port> "<F-ports>" Sets the F_Port mapping
--mapadd <N_Port> "<F-ports>" Adds the F_Ports to existing N_Port mapping
--mapdel <N_Port> "<F-ports>" Deletes F_Ports from N_Port Mapping
--failovershow [N_Port] Displays the failover policy for the N_Port(s)
--failoverdisable <N_Port> Disables failover policy for an N_Port
--failoverenable <N_Port> Enables failover policy for an N_Port
--failbackshow [N_Port] Displays the failback policy for an N_Port
--failbackdisable <N_Port> Disables the failback policy for an N_Port
--failbackenable <N_Port> Enables the failback policy for an N_Port
switch:admin> ag --modeshow
Access Gateway mode is enabled.
switch:admin> ag --modeshow
Access Gateway mode is NOT enabled.
switch:admin> ag --show
Name : switch
NodeName : 10:00:00:05:1e:04:06:bb
Number of Ports : 24
IP Address(es) : 10.32.173.66, fec0:60:69bc:66:205:1eff:fe36:1199
Firmware Version : v5.3.0_rel_bld46
N_Ports : 2
F_Ports : 2
Attached N_Port information:
Port PortID PortWWN FO FB IP_Addr F_Ports
-------------------------------------------------------------------
17 0x023d00 20:3d:00:05:1e:37:12:2a 1 1 10.32.173.52 1;9;
19 0x023c00 20:3c:00:05:1e:37:12:2a 1 1 10.32.173.52 None
--------------------------------------------------------------------
Attached F_Port information:
Port PortID Port WWN N_Port
-------------------------------------------------
1 0x023d01 10:00:00:00:c9:56:b3:46 17
9 0x023d02 50:06:0b:00:00:6a:57:70 17
-------------------------------------------------
Note: "ag --show" always shows the current online information.
To display all the F_Ports that are mapped to a given N_Port:
switch:admin> ag --mapshow
N_Port Configured_F_Ports Current_F_Ports Failover Failback
---------------------------------------------------------------
0 15;16 None 1 1
17 1;2;21 1;9 1 1