Brocade Fabric OS Command Reference Manual - Supporting Fabric OS v5.3.0 (53-1000436-01, June 2007)

Fabric OS Command Reference Manual 491
53-1000436-01
portLogClear
2
portLogClear
Clears the port log.
Synopsis portlogclear
Description Use this command to clear the port log. You might want to clear the port log before triggering an
activity so that the log displays only the log events related to that activity.
If the port log is disabled, portLogClear enables it. The port log is disabled automatically when
certain errors occur in order to allow the collection of all the information needed to understand the
cause of the error. When the port log is disabled, the events already present in the log are
preserved, but new events are not collected.
The following errors disable the port log:
FCPH, EXCHBAD
FCPH, EXCHFREE
NBFSM, DUPEPORTSCN
UCAST, RELICPDB
Refer to the Fabric OS Message Reference for more information.
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands none
Examples To clear the port log:
switch:admin> portlogclear
switch:admin> portlogshow
port log is empty
See Also portLogDump, portLogShow