Brocade Fabric OS Command Reference Manual - Supporting Fabric OS v5.3.0 (53-1000436-01, June 2007)

Fabric OS Command Reference Manual 497
53-1000436-01
portLogEventShow
2
portLogEventShow
Displays information about port log events.
Synopsis portlogeventshow
Description Use this command to display information about the ID associated with the various port log events.
The Disabled field indicates if the port log for that event ID is disabled (1) or enabled (0).
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands none
Examples Display information about port log events:
switch:admin> portlogeventshow
ID Event-Name Disabled
---------------------------------
1 start 0
2 disable 0
3 enable 0
4 ioctl 0
5 Tx 0
6 Tx1 0
7 Tx2 0
8 Tx3 0
9 Rx 0
10 Rx1 0
11 Rx2 0
12 Rx3 0
13 stats 0
14 scn 0
15 pstate 0
16 reject 0
17 busy 0
18 ctin 0
19 ctout 0
20 errlog 0
21 loopscn 0
22 create 0
23 debug 1
24 nbrfsm 0
25 timer 0
26 sn 0
27 fcin 0
28 fcout 0
29 read 0
30 write 0
31 err 0
32 frame 0
33 msRemQ 0
34 msRemR 0
35 nsRemQ 0
36 nsRemR 0
37 rscn 0
38 state 0
39 xalloc 0
(continued on next page)