Brocade Fabric OS Command Reference Manual - Supporting Fabric OS v5.3.0 (53-1000436-01, June 2007)

Fabric OS Command Reference Manual 531
53-1000436-01
portStats64Show
2
stat64_rateRxPeakByte
Rx peak Byte rate (Bytes/sec).
stat64_PRJTFrames Number of P_RJT frames transmitted.
stat64_PBSYFrames Number of P_BSY transmitted.
stat64_inputBuffersFull
Occasions on which input buffers are full.
stat64_rxClass1Frames
Class 1 frames received.
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands This command has the following operands:
slotnumber For bladed systems only, specify the slot number of the port to be displayed,
followed by a slash (/).
portnumber Specify a port number to be displayed, relative to its slot for bladed systems.
Use switchShow to display a list of valid ports.
Examples To display the 64-bit hardware statistics for a port:
switch:user> portstats64show 4/15
stat64_wtx 0 top_int : 4-byte words transmitted
316 bottom_int : 4-byte words transmitted
stat64_wrx 0 top_int : 4-byte words received
1486 bottom_int : 4-byte words receive
stat64_ftx 0 top_int : Frames transmitted
69 bottom_int : Frames transmitted
stat64_frx 0 top_int : Frames received
73 bottom_int : Frames received
stat64_c2_frx 0 top_int : Class 2 frames received
0 bottom_int : Class 2 frames received
stat64_c3_frx 0 top_int : Class 3 frames received
37 bottom_int : Class 3 frames received
stat64_lc_rx 0 top_int : Link control frames received
8 bottom_int : Link control frames received
stat64_mc_rx 0 top_int : Multicast frames received
0 bottom_int : Multicast frames received
stat64_mc_to 0 top_int : Multicast timeouts
0 bottom_int : Multicast timeouts
stat64_mc_tx 0 top_int : Multicast frames transmitted
0 bottom_int : Multicast frames transmitted
tim64_rdy_pri 0 top_int : Time R_RDY high priority
60438254 bottom_int : Time R_RDY high priority
tim64_txcrd_z 0 top_int : Time BB_credit zero
2 bottom_int : Time BB_credit zero
er64_enc_in 0 top_int : Encoding errors inside of frames
0 bottom_int : Encoding errors inside of frames
er64_crc 0 top_int : Frames with CRC errors
0 bottom_int : Frames with CRC errors
er64_trunc 0 top_int : Frames shorter than minimum
0 bottom_int : Frames shorter than minimum
er64_toolong 0 top_int : Frames longer than maximum
0 bottom_int : Frames longer than maximum
er_bad_eof 0 top_int : Frames with bad end-of-frame
0 bottom_int : Frames with bad end-of-frame
(continued on next page)