Brocade Fabric OS Command Reference Manual - Supporting Fabric OS v5.3.0 (53-1000436-01, June 2007)

Fabric OS Command Reference Manual 541
53-1000436-01
portSwapShow
2
portSwapShow
Displays the state of the portswap feature.
Synopsis portswapshow
Description Use this command to display the enabled state of the portswap feature, as well as port and area
information for those ports whose area number id different from the default area number. The
default area number of a port is same as its switch port number.
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands none
Examples To display the enabled state of the portswap feature and information for ports whose area numbers
have been swapped:
switch:admin> portswapshow
PortSwap is enabled
Slot Slotport Swport Area
============================================
2 2 18 19
2 3 19 18
See Also portSwap, portDisable, portEnable, portShow, portSwap, portSwapDisable, portSwapEnable,
switchShow