Brocade Fabric OS Command Reference Manual - Supporting Fabric OS v5.3.0 (53-1000436-01, June 2007)

560 Fabric OS Command Reference Manual
53-1000436-01
secFabricShow
2
secFabricShow
Displays security-related fabric information.
Synopsis secfabricshow
Description This command displays the security-related information about the fabric.
The information displayed is as follows:
Role Displays whether the switch is the primary FCS, backup FCS, or not FCS.
WWN Displays the World Wide Name of the switch.
DId Displays the domain of the switch.
Status Displays the security state of the switch.
Ready This switch is in a stable state.
Busy This switch is updating its security database.
Error This switch's security database is inconsistent with the primary FCS.
Enet IP Addr Displays the static IPV6 and IPV4 addresses.
Name Displays the switch name.
NoResp Displays if the switch did not respond to the status query.
Unknown Displays if the switch is in an unknown state.
This command can only be issued in secure mode.
This command must be issued from a sectelnet or SSH session.
When this command is issued on multiple switches in the fabric, one or more of these switches can
display a status of busy.
Operands none
Examples To display security-related fabric information on the primary FCS switch having only IPV4 address
configuration
primaryfcs:admin> secFabricShow
S<Role WWN DId Status EnetIPAddr Name>
===============================================================
non-FCS 10:00:00:60:69:10:03:23 1 Ready 0.0.0.0 sw1
Backup 10:00:00:60:69:00:12:53 2 Ready 0.0.0.0 sw2
Primary 10:00:00:60:69:22:32:83 3 Ready 0.0.0.0 sw3
______________________________________________________________
Secured switches in the fabric: 3
IPV6 configured switches may have a link local address, an optional statically configured IPv6
address and up to N auto configured IPv6 addresses. When IPv6 addresses are configured in the
fabric, only the static ipaddress is displayed under the Enet IP Addr field and the IPv4 address
information.