Brocade Fabric OS Command Reference Manual - Supporting Fabric OS v5.3.0 (53-1000436-01, June 2007)

570 Fabric OS Command Reference Manual
53-1000436-01
secModeEnable
2
Changing password for admin
New FCS switch admin password:
Re-type new password:
Changing password for user
New fabric wide user password:
Re-type new password:
Changing password for admin
New Non FCS switch admin password:
Re-type new password:
Broadcast message from root Thu Feb 26 02:58:52 2004...
Security Policy or Password Change: root factory admin user will be
logged out on switch 0
Connection closed by foreign host.
user@hostmachine{238}%
To enable secure mode using --quickmode:
fcsprimary:admin> secmodeenable --quickmode
Your use of the certificate-based security features of the software
installed on this equipment is subject to the End User License Agreement
provided with the equipment and the Certification Practices Statement,
which you may review at http://www.switchkeyactivation.com/cps. By using
these security features, you are consenting to be bound by the terms of
these documents. If you do not agree to the terms of these documents,
promptly contact the entity from which you obtained this software and do
not use these security features.
Do you agree to these terms? (yes, y, no, n): [no] y
This command requires Switch Certificate, Security license and Zoning
license to be installed on every switch in the fabric.
NOTE: On successful completion of this command, login sessions
may be closed and some switches may go through a reboot to form a secure
fabric.
Non-FCS admin password will be set the same as FCS admin password.
ARE YOU SURE (yes, y, no, n): [no] y
Please enter current admin account password:
Secure mode is enabled.
To enable secure mode using --currentpwd --fcs "*":
fcsprimary:admin> secmodeenable --currentpwd --fcs "*"
Your use of the certificate-based security features of the software
installed on this equipment is subject to the End User License Agreement
provided with the equipment and the Certification Practices Statement, which
you may review at http://www.switchkeyactivation.com/cps. By using
these security features, you are consenting to be bound by the terms of these
documents. If you do not agree to the terms of these documents,
promptly contact the entity from which you obtained this software and do