Brocade Fabric OS Command Reference Manual - Supporting Fabric OS v5.3.0 (53-1000436-01, June 2007)

Fabric OS Command Reference Manual 571
53-1000436-01
secModeEnable
2
not use these security features.
Do you agree to these terms? (yes, y, no, n): [no] y
This command requires Switch Certificate, Security license and Zoning
license to be installed on every switch in the fabric.
NOTE: On successful completion of this command, login sessions
may be closed and some switches may go through a reboot to form a secure
fabric.
Non-FCS admin password will be set the same as FCS admin password.
ARE YOU SURE (yes, y, no, n): [no] y
Please enter current admin account password:
Secure mode is enabled.
NOTE
A maximum of 80 WWNs can be specified in the FCS policy using the secModeEnable command. To
add more WWNs use the secPolicyAdd command.
Ensure that all users (using Fabric OS CLI or Web Tools) are logged off the fabric before enabling
secure mode. All users whose account passwords are changed will be logged off once secure mode
is enabled. The --currentpwd option will use the current passwords on the Primary FCS, therefore
users logged into the Primary FCS are not logged off.
User accounts that are forcefully expired while in nonsecure mode cannot be used when secure
mode is enabled. Passwords of such user accounts can be changed only after secure mode is
disabled.
See Also secFabricShow, secModeDisable, secModeShow, secPolicyShow