Brocade Fabric OS Command Reference Manual - Supporting Fabric OS v5.3.0 (53-1000436-01, June 2007)

Fabric OS Command Reference Manual 573

53-1000436-01

secNonFCSPasswd

Sets the admin password for non-FCS switches.

Synopsis secnonfcspasswd

Description Use this command to change the admin password on all non-FCS switches in the fabric. The

changed passwords are persistent across reboots. All non-FCS switches that join the fabric in the

future inherit this new password.

The password must be between 8 and 40 characters long and can consist of any combination of

alphanumeric characters.

Ensure no non-FCS admin users are logged in when this command is executed, otherwise, users on

non-FCS switches sessions terminate.

This command can be issued only in secure mode and only from the primary FCS switch.

Operands none

Examples To set the admin password for all non-FCS switches in the fabric:

primaryfcs:admin> secnonfcspasswd

Changing password for admin

Non FCS switch admin password:

Re-type new password:

Password for non-FCS admin account has been changed successfully.

See Also passwd, secModeDisable, secModeEnable, secModeShow, secTempPasswdSet