Brocade Fabric OS Command Reference Manual - Supporting Fabric OS v5.3.0 (53-1000436-01, June 2007)

574 Fabric OS Command Reference Manual

53-1000436-01

secPolicyAbort

Aborts all changes to the defined database that have not been saved.

Synopsis secpolicyabort

Description Use this command to abort all changes to the defined security database that have not been saved

to flash memory and to abort changes to policy creation and modification operations from all the

switches if fabric-wide consistency policy is not set for the particular policy.

When secure mode is enabled, this command can be issued only from the Primary FCS switch.

When in non-secure mode, this command can be issued for ACL policy management.

NOTE

Only the user who made the changes to the defined database may use this command to abort them.

Operands none

Examples To abort all changes that have not been saved to nonvolatile memory:

primaryfcs:admin> secpolicyabort

Unsaved data has been aborted.

primaryfcs:admin> secpolicyabort

No new data to abort.

See Also secPolicyActivate, secPolicyAdd, secPolicyCreate, secPolicyDelete, secPolicyDump,

secPolicyRemove, secPolicySave, secStatsShow