Brocade Fabric OS Command Reference Manual - Supporting Fabric OS v5.3.0 (53-1000436-01, June 2007)

584 Fabric OS Command Reference Manual
53-1000436-01
secPolicyDump
2
secPolicyDump
Displays all members of existing security policies.
Synopsis secpolicydump ["listtype"][, "name"]
Description Use this command to display, without page breaks, the members of an existing policy in the active
and defined (saved) databases.
When secure mode is enabled, this command can be issued from all the FCS switches in the fabric.
Operands This command has the following operands:
"listtype"Specify which database to display. The name for active database is "Active"; the name for
saved, defined database is "Defined". If not specified, all databases are displayed.
"name" Specify the name of a security policy you would like to display.
Valid values for this operand are:
• DCC_POLICY_nnn
• FCS_POLICY
• TELNET_POLICY
• HTTP_POLICY
• API_POLICY
• RSNMP_POLICY
• WSNMP_POLICY
• SES_POLICY
• MS_POLICY
• SERIAL_POLICY
• FRONTPANEL_POLICY
• SCC_POLICY
• OPTIONS_POLICY
The specified policy name must be capitalized.
The DCC_POLICY_nnn name has the common prefix DCC_POLICY_ followed by a string of user
defined characters. These characters do not have to be capitalized like regular policy names.
This operand is optional.
When in non-secure mode this command can be used to view only SCC and DCC policies.
Examples To display all security policy information from all databases (active, updating, and defined), without
page breaks:
primaryfcs:admin> secpolicydump
____________________________________________________
DEFINED POLICY SET
FCS_POLICY
Pos Primary WWN DId swName
__________________________________________________
1 Yes 10:00:00:60:69:30:15:5c 1 primaryfcs