Brocade Fabric OS Command Reference Manual - Supporting Fabric OS v5.3.0 (53-1000436-01, June 2007)

590 Fabric OS Command Reference Manual
53-1000436-01
secPolicySave
2
secPolicySave
Saves a defined security policy to persistent memory on all switches in the fabric.
Synopsis secpolicysave
Description Use this command to save a defined security policy to persistent memory of all switches in the
fabric. Secpolicysave saves the modified SCC, DCC, and FCS policies to Defined Security Policy Set
on the local switch. This command is always a local switch operation.
When secure mode is enabled, this command saves Defined Security Policy to persistent memory
on all switches in the fabric and can be issued only from the primary FCS switch.
NOTE
A fabric-wide consistency configuration does not affect the behavior of this command.
Operands none
Example To save defined policy set to persistent memory:
switch:admin> secpolicysave
secpolicysave command was completed successfully.
See Also fddCfg, secPolicyAbort, secPolicyActivate, secPolicyAdd, secPolicyCreate, secPolicyDelete,
secPolicyDump, secPolicyRemove, secStatsShow