Brocade Fabric OS Command Reference Manual - Supporting Fabric OS v5.3.0 (53-1000436-01, June 2007)

596 Fabric OS Command Reference Manual
53-1000436-01
secStatsShow
2
To access DCC policies, enter DCC_POLICY. Violations are not tracked for individual DCC policies.
The statistics for all DCC_POLICY violations are grouped together.
This operand is optional and the default is all statistics. If the list operand is specified, then this
operand is required.
"list" Specify a list of domains to display the security statistics on. Specify an
asterisk (*) to represent all switches in the fabric or specify a list of domains
separated by semicolons. This operand is optional and the default value is
the local switch.
Examples To display the MS_POLICY statistics on the local switch:
switch:admin> secstatsshow "MS_POLICY"
Name Value
====================
MS 20
To display statistic information for TELNET_POLICY for all switches in the fabric (example from an
nonsecure switch):
switch:admin> secstatsshow "TELNET_POLICY", "*"
Fabric Statistics:
Domain 1:
Name Value
=========================================
TELNET_POLICY 0
Domain 69:
Name Value
=========================================
TELNET_POLICY 0
Domain 70:
Name Value
=========================================
TELNET_POLICY 0
See Also secFabricShow, secStatsReset