Brocade Fabric OS Command Reference Manual - Supporting Fabric OS v5.3.0 (53-1000436-01, June 2007)

Fabric OS Command Reference Manual 603

53-1000436-01

setEsdMode

Enables or disables ESD mode.

Synopsis setesdmode [mode | -show]

Description Use this command to enable or disable ESD mode. The mode is saved in flash memory and stays in

that mode until the next execution of setEsdMode. The mode becomes active as soon as this

command is executed. It does not require a reboot to take effect.

ESD mode modifies the behavior of the diagnostic test methods and post scripts. The exact

behavior varies but most commonly consists of disabling the ports defined with diagEsdPorts when

spinSilk or other functional tests are run for ESD or EMI testing purposes.

You can issue this command on the FR4-18i blade in a Brocade chassis; however, the command is

not supported by the Brocade platform and does not effect any other feature operations. This

availability is offered to maintain consistency across a mixed-blade environment.

The execution of this command is subject to Admin Domain restrictions that may be in place.

Operands This command has the following operands:

mode Specify 1 to enable ESD mode, 0 to disable ESD mode. This operand is

optional.

-show Specify this operand to display the current mode setting. This operand is

optional.

If no operand is specified, the current value displays.

Examples To display the ESD mode:

switch:admin> setesdmode -show

Esd Mode is 0 (Disabled).