Brocade Fabric OS Command Reference Manual - Supporting Fabric OS v5.3.0 (53-1000436-01, June 2007)

34 Fabric OS Command Reference Manual
53-1000436-01
aliDelete
2
aliDelete
Deletes a zone alias.
Synopsis alidelete "aliName"
Description Use this command to delete a zone alias.
This command changes the defined configuration. For the change to be preserved across switch
reboots, it must be saved to nonvolatile memory using the cfgSave command. For the change to
become effective, an appropriate zone configuration must be enabled using the cfgEnable
command.
This command requires a Brocade Advanced Zoning license.
When secure mode is enabled, this command can be issued only from the primary FCS switch.
Operands This command has the following operand:
"aliName" Specify the name of zone alias to be deleted. This operand must be enclosed
in quotation marks. This operand is required.
Examples To delete the zone alias array2:
switch:admin> alidelete "array2"
See Also aliAdd, aliCreate, aliRemove, aliShow