Brocade Fabric OS Command Reference Manual - Supporting Fabric OS v5.3.0 (53-1000436-01, June 2007)

Fabric OS Command Reference Manual 651

53-1000436-01

supportFfdc

Modifies or displays first-fault data capture (FFDC) daemon.

Synopsis supportffdc [--disable | --enable | --show]

Description Use this command to disable or enable the FFDC events, or display the current configuration. If

disabled, the daemon does not capture any data even when a message with FFDC attributes is

logged. FFDC is enabled by default.

The execution of this command is subject to Admin Domain restrictions that may be in place.

Operands This command has the following operands:

--disable Disables the FFDC.

--enable Enables the FFDC.

--show Displays the FFDC configuration parameters.

Without operands, the command syntax is displayed.

Examples To display the FFDC configuration:

switch:admin> supportffdc --show

First Failure Data Capture (FFDC) is disabled.

To enable the FFDC events:

switch:admin> supportffdc --enable

First Failure Data Capture (FFDC) is enabled.