Brocade Fabric OS Command Reference Manual - Supporting Fabric OS v5.3.0 (53-1000436-01, June 2007)

656 Fabric OS Command Reference Manual
53-1000436-01
supportSave
2
Saving support information for switch:swd76, module:NS_evlog...
/tmp/supportSave_files/swd76-S6-200508280208-NS_evlog.ss: 2.72 kB 928.95
B/s
Saving support information for switch:routing1, module:FSPF_Log...
...e_files/routing1-S6-200508280208-FSPF_Log.ss: 2.04 kB 694.31 B/s
Saving support information for switch:routing1, module:CORE_FFDC...
No core or FFDC data files found!
Saving support information for switch:routing1, module:CHKCONFIG...
...e_files/routing1-S6-200508280208-CHKCONFIG.ss: 1.04 kB 694.31 B/s
Saving support information for switch:routing1, module:CONSOLE...
...e_files/routing1-S6-200508280208-CONSOLE: 64 kB 694.31 B/s
Saving support information for switch:routing1, module:CHKRPM...
...e_files/routing1-S6-200508280208-CHKRPM.ss: 10.04 kB 694.31 B/s
Saving support information for switch:routing1, module:DIAGLOG...
...rtSave_files/routing1-S6-200508280207-DIAGLOG.ss: 195.34 kB 64.62 kB/s
Saving support information for switch:routing1, module:VARLOGTIME...
/tmp/supportSave_files/routing1-S6-200508280208-VARLOGTIME: 451.00 B
150.55 B/s
Saving support information for switch:routing1, module:BURNINSTAT...
...ortSave_files/routing1-S6-200508280208-BURNINSTAT: 81.00 B 27.01 B/s
Saving support information for switch:routing1, module:BURNINERR...
...ave_files/routing1-S6-200508280208-BURNINERR.ss: 11.99 kB 3.99 kB/s
Saving support information for switch:routing1, slot 3...
slot 3 support file transfer done
Saving support information for switch:routing1, slot 9...
slot 9 support file transfer done
To save RASLOG, TRACE, and supportShow , core file, FFDC data, and other information to a FTP
server in interactive mode on a dual-CP system:
switch:admin> supportsave
This command will collect RASLOG, TRACE, supportShow, core file, FFDC data and
other support information and then transfer them to a FTP server. Only
the local CP's and BPs' information will be saved and supportShow information
is only available on the Active CP. This operation can take several
minutes.
NOTE: supportSave will the transfer existing trace dump file first, then
automatically generate and transfer latest one. There will be two trace
dump files transfered after this command.
OK to proceed? (yes, y, no, n): [no]
Host IP: 192.168.1.1
User Name: admin
Password: *****
Remote Directory: tmp
Saving support information for switch:routing1, module:RASLOG...