Brocade Fabric OS Command Reference Manual - Supporting Fabric OS v5.3.0 (53-1000436-01, June 2007)

658 Fabric OS Command Reference Manual

53-1000436-01

supportShow

Displays switch information for debugging purposes.

Synopsis supportshow [[slotnumber/]portnumber1-portnumber2] [lines]

Description Use this command to display support information from groups of preselected Fabric OS and Linux

commands. You can specify the range of ports for which this information displays. These

commands are organized by groups, but note that the order of the groups listed next is not the

same as executed by the command.

This is a diagnostic command and should only be run for diagnostic support.

Refer to “supportShow Reference”, for more information.

The commands have been arranged in groups identified as follows:

OS (ENABLED by default)

mii-tool

rpm

dmesg

fstab

mtab

cat/proc/meminfo

various proc entries

find core files

exception (ENABLED by default)

errDump

pdShow

port (ENABLED by default)

diagShow (per-slot)

portShow (per-port)

portLoginShow (per-port)

portRouteShow (per-port)

portCamShow (per-port)

portLogDump (per-port)

fabric (ENABLED by default)

fabricShow

islShow

trunkShow