Brocade Fabric OS Command Reference Manual - Supporting Fabric OS v5.3.0 (53-1000436-01, June 2007)

Fabric OS Command Reference Manual 663
53-1000436-01
supportShowCfgDisable
2
supportShowCfgDisable
Disables a group of commands under the supportShow command.
Synopsis supportshowcfgdisable [os | exception | port | fabric | services | security | network | portlog |
systemextend | filter | perfmon | ficon | iswitch | asic_db |iscsi]
Description Use this command to disable a group of commands under the supportShow command. Use the
supportShowCfgEnable command to enable groups of commands. Refer to Chapter 6,
“supportShow Reference”, for more information.
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands This command has the following operand:
os
Disables the OS group commands
exception Disables the exception group commands
port Disables the port group commands
fabric Disables the fabric group commands
services Disables the service group commands
security Disables the security group commands
network Disables the network group commands
portlog Disables the portlog group commands
system Disables the system group commands
extend Disables the extend group commands
filter Disables the filter group commands
perfmon Disables the Performance Monitor group commands
ficon Disables the FICON group commands
iswitch Disables the group iswitch commands
asic_db
Disables the group asic_db commands
iscsi
Disables the group iswitch commands
Examples To disable the OS group of commands under the supportShow command:
switch:admin> supportshowcfgdisable os
Config update Succeeded
See Also supportShow, supportShowCfgEnable, supportShowCfgShow