Brocade Fabric OS Command Reference Manual - Supporting Fabric OS v5.3.0 (53-1000436-01, June 2007)

674 Fabric OS Command Reference Manual

53-1000436-01

switchReboot

Halts and reboots the operational switch.

Synopsis switchreboot

Description This command reboots the operational switch without disrupting the other switch in a dual-switch

chassis.

This command is equal to running switchShutdown.

This command is not supported on single-domain systems.

The execution of this command is subject to Admin Domain restrictions that may be in place.

Operands none

Examples To reboot an operational switch:

switch:admin> switchreboot

Stopping all switch daemons...Done.

Powering off slot 1...Done.

Powering off slot 4...Done.

Checking all slots are powered off...Done.

Cleaning up kernel modules...Done.

Initializing kernel modules...Done.

Starting all switch daemons...Done.

Powering on slot 1...Done.

Powering on slot 4...Done.

Checking diagnostics...Done.

setup FCIP IP: ifconfig fc0 ip=0.0.0.0, netmask=255.255.255.0