Brocade Fabric OS Command Reference Manual - Supporting Fabric OS v5.3.0 (53-1000436-01, June 2007)

684 Fabric OS Command Reference Manual
53-1000436-01
switchStatusPolicyShow
2
switchStatusPolicyShow
Displays the policy parameters that determine overall switch status.
Synopsis switchstatuspolicyshow
Description Use this command to view the current policy parameters set for the switch. These policy
parameters determine the number of failed or nonoperational units allowed for each contributor
before triggering a status change in the switch.
The command displays the current parameters in a three-column format, shown in the table. The
first column indicates the contributor, the second column indicates the minimum number that
contributes to the DOWN status, and the third column indicates the minimum number that
contributes to the MARGINAL status. The parameters can be set by the switchStatusPolicySet
command. The existence of policies such as Fans, PowerSupplies, CP, WWN, and Blade might differ
from platform to platform.
The policy parameters determine the number of failed or nonoperational units for each contributor
that trigger a status change in the switch. For example, if the FaultyPorts DOWN parameter is set to
3, and three ports fail in the switch, then the status of the switch changes to DOWN.
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands none
Examples
switch:admin> switchstatuspolicyshow
The current overall switch status policy parameters:
Down Marginal
----------------------------------
PowerSupplies 2 1
Temperatures 2 1
Fans 2 1
WWN 0 1
CP 0 1
Blade 0 1
Flash 0 1
MarginalPorts 2 1
FaultyPorts 2 1
TABLE 19 Default Contributor, Values, and Status
Contributor DOWN Default MARGINAL Default
PowerSupplies 2 1
Temperatures 2 1
Fans 2 1
WWN 0 1
CP 0 1
Blade 0 1
Flash 0 1
MarginalPorts 2 1
FaultyPorts 2 1
MissingSFPs 0 0