Brocade Fabric OS Command Reference Manual - Supporting Fabric OS v5.3.0 (53-1000436-01, June 2007)

686 Fabric OS Command Reference Manual
53-1000436-01
switchStatusShow
2
switchStatusShow
Displays overall switch status.
Synopsis switchstatusshow
Description Use this command to display the overall status for a switch that is configured with IPv4 and IPv6
addresses. In addition, users with a Fabric Watch license are able to view the list of unhealthy
ports.
This command displays the overall switch status, and the status of the following contributors:
Power supplies
Temperatures
Fans
WWN servers (dual CP systems only)
Standby CP (dual CP systems only with HA enabled)
Blades (bladed systems only)
Flash
Marginal ports
Faulty ports
Missing SFPs
Status values are HEALTHY, MARGINAL, or DOWN, depending on whether thresholds established by
switchStatusPolicySet have been exceeded. The overall status is based on the most severe status
of all contributors.
Refer to switchStatusPolicyShow for details on the calculation of contributors and overall switch
status.
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands none
Examples To display a switch health report:
To retrieve a switch health report for a switch that is configured
with an IPv6 address:
switch:user> switchstatusshow
Switch Health Report Report time: 09/11/2006 05:39:28 PM
Switch Name: switch
IP address: 1080::8:800:200C:417A
SwitchState: MARGINAL
Duration: 80:12
Power supplies monitor HEALTHY
Temperatures monitor HEALTHY
Fans monitor HEALTHY
Flash monitor MARGINAL
Marginal ports monitor HEALTHY
Faulty ports monitor HEALTHY
Missing SFPs monitor HEALTHY