Brocade Fabric OS Command Reference Manual - Supporting Fabric OS v5.3.0 (53-1000436-01, June 2007)

Fabric OS Command Reference Manual 697

53-1000436-01

tempShow

Displays temperature readings.

Synopsis tempshow

Description Use this command to display the current temperature readings of all temperature sensors in a

switch. For each sensor, this command displays the slot number (if applicable), the sensor state,

and the temperature. The temperature readings are given in both Centigrade and Fahrenheit.

Refer to the hardware reference manual for your switch to determine the normal temperature

range.

The execution of this command is subject to Admin Domain restrictions that may be in place.

Operands none

Examples To display temperature and status sensors:

switch:user> tempshow

Index Slot State Centigrade Fahrenheit

=====================================================

1 1 Ok 41 105

2 2 Ok 39 102

3 3 Absent

4 4 Absent

5 5 Ok 26 78

6 6 Ok 27 80

See Also fanShow, psShow, sensorShow, slotShow