Manualshelf

Brocade Fabric OS Command Reference Manual - Supporting Fabric OS v5.3.0 (53-1000436-01, June 2007)

ManualsBrandsHP ManualsStorageHP StorageWorks 4/32B SAN Switch Power Pack
761762763764765766767768769770
Fabric OS Command Reference Manual 735
53-1000436-01
zoneDelete
2
zoneDelete
Deletes a zone.
Synopsis zonedelete "zonename"
Description Use this command to delete a zone.
This command changes the defined configuration. For the change to be preserved across switch
reboots, it must be saved to flash memory using the cfgSave command. For the change to become
effective, an appropriate zone configuration must be enabled using the cfgEnable command.
This command requires a Brocade Advanced Zoning license.
When secure mode is enabled, this command can be issued only from the primary FCS switch.
Operands This command has the following operand:
"zonename" Name of the zone to be deleted, in quotation marks. This operand is required.
Examples To delete the zone “Blue_zone”:
switch:admin> zonedelete "Blue_zone"
See Also zoneAdd, zoneCreate, zoneRemove, zoneShow