Brocade Fabric OS Command Reference Manual - Supporting Fabric OS v5.3.0 (53-1000436-01, June 2007)

Fabric OS Command Reference Manual 739

53-1000436-01

zoneObjectRename

Renames a zone object.

Synopsis zoneObjectRename "objectName", "newName"

Description Use this command to rename a zone object. You can use this command for all zone object types,

including cfg, zone, and alias.

A zone configuration name must begin with a letter that can be followed by any number of letters,

numbers, and underscores. Names are case sensitive; for example, "Cfg_1" and "cfg_1" are

different zone configurations. Spaces are ignored.

This command changes the defined configuration. For the change to be preserved across switch

reboots, it must be saved to nonvolatile memory using the cfgSave command. For the change to

become effective, an appropriate zone configuration must be enabled using the cfgEnable

command.

Refer to the zoneCreate command for more information on name and member specifications.

This command requires a Brocade Advanced Zoning license.

When secure mode is enabled, this command can be issued only from the primary FCS switch.

Operands This command has the following operands:

"objectName" The name of the object that you want to rename. Quotation marks are

optional. This operand is required.

"newName" The new name of the object. Quotation marks are optional. This operand is

required.

Examples To create a configuration containing three zones:

switch:admin> cfgshow "*"

cfg: USA_cfg Red_zone; White_zone; Blue_zone

switch:admin> zoneobjectrename "USA_cfg", "UK_cfg"

switch:admin> cfgshow "*"

cfg: UK_cfg Red_zone; White_zone; Blue_zone

See Also cfgAdd, cfgClear, cfgDelete, cfgDisable, cfgEnable, cfgRemove, cfgSave, cfgShow, zoneObjectCopy