Brocade Fabric OS Command Reference Manual - Supporting Fabric OS v5.3.0 (53-1000436-01, June 2007)

Fabric OS Command Reference Manual 743
53-1000436-01
Chapter
3
Licensed Product Commands
This chapter summarizes the commands that are only available with a license key.
• “Advanced Zoning Commands,” next
• “Fabric Assist Mode Commands” on page 744
• “Extended Fabrics Command” on page 745
• “Fabric Watch Commands” on page 745
• “ISL Trunking Commands” on page 746
• “Advanced Performance Monitoring Commands” on page 746
• “Secure Fabric OS Commands” on page 747
NOTE
For more information about Advanced Zoning, QuickLoop, Extended Fabrics, Fabric Watch, Trunking,
or Performance Monitoring, refer to the Fabric OS Administrator’s Guide.
Advanced Zoning Commands
The following commands are available with the purchase of a Brocade Advanced Zoning license
key.
TABLE 1 Zoning Commands
Command Description
Zone Aliases
aliAdd Adds a member to a zone alias.
aliCreate Creates a zone alias.
aliDelete Deletes a zone alias.
aliRemove Removes a member from a zone alias.
aliShow Displays zone alias information.
Zone Members
zoneAdd Adds a member to a zone.
zoneCreate Creates a zone.
zoneDelete Deletes a zone.
zoneRemove Removes a member from a zone.
zoneShow Displays zone information.
Zone Objects
zoneObjectCopy Copies a zone object.