Brocade Fabric OS Command Reference Manual - Supporting Fabric OS v5.3.0 (53-1000436-01, June 2007)

744 Fabric OS Command Reference Manual
53-1000436-01
Fabric Assist Mode Commands
3
Fabric Assist Mode Commands
The following Fabric Assist Mode commands are available with the purchase of a Brocade
Advanced Zoning license.
NOTE
The Fabric Assist Mode is only available on Fabric OS v2.6.x and v3.x systems in the fabric; it is not
supported on Fabric OS v4.x or v5.x.
zoneObjectExpunge Expunges a zone object.
zoneObjectRename Renames a zone object.
Zone Configuration
cfgActvShow Displays effective zone configuration information.
cfgAdd Adds a zone to a zone configuration.
cfgClear Clears all zone configurations.
cfgCreate Creates a zone configuration.
cfgDelete Deletes a zone configuration.
cfgEnable Enables a zone configuration.
cfgRemove Removes a zone from a zone configuration.
cfgSave Saves zone configurations in flash memory.
cfgShow Displays zone configuration information.
cfgSize Displays zone and Admin Domain database size details.
cfgTransAbort Aborts the current zoning transaction.
cfgTransShow Displays information about the current zoning transaction.
defZone Activates or deactivates a default zone configuration, or displays the
current configuration.
zone Performs zone-related operations.
TABLE 1 Zoning Commands (Continued)
Command Description
TABLE 2 QuickLoop Fabric Assist Mode Commands
Command Description
fazoneAdd Adds a member to a Fabric Assist Mode zone.
fazoneCreate Creates a Fabric Assist Mode zone.
fazoneDelete Deletes a Fabric Assist Mode zone.
fazoneRemove Removes members from a Fabric Assist Mode zone.
fazoneShow Displays Fabric Assist zone information.